VS-pro Vakuum System
Vacuum unit with one or two vacuum outputs, for constant or tension controlled vacuum. With keypad and display for basic status check and configuration.
Typical Applications
- Long term monitoring
- Defined pore water sampling
- Defined leachate measurements
- Lysimeter sites
Advantages
- Display and keypad for basic status
check and configuration - Continuous display of readings and status on the LCD
- LCD backlight and multicolor LED
- Vacuum pump with high accuracy
- Two vacuum outputs
- Selectable constant or tension controlled vacuum
- Optimised for rechargeable battery supply
- One Tensiometer connectable: T8, T4 or T5
- Multiple configuration options
- Integrated data logger
Technical Information
| Supply | 10,5 ...15 VDC |
|
Current consumption | |
| - Operating average | approx. 15 mA |
| - Standby | approx. 1 mA |
| - While pumping | 50 … 800 mA |
| Interface | RS-485 tensioLINK |
| Analog output | 2 x 0 mV…2000 mV |
|
Vacuum regulation | |
| - Range | 0…-850 hPa |
| - Accuracy | ±0,5 hPa |
| Memory | 4500 readings |
| Dimensions | 260 x 160 x 100 mm |
| Protective rate | IP 66 |
| Operating temp. | -10°C … +45°C |
| Enclosure | Aluminium |
Configurations
| Art. No. | Description |
VS-pro |
VS with display and two vacuum outputs |
Contact
Andreas SteinsPhone: +49 89 12 66 52 - 18
Fax: +49 89 12 66 52 - 20
E-Mail: as@ums-muc.de
contact page UMS
Contact Distributors
VS/VS-pro Manual
VS/VS Firmware V2.0
